Ray Tracing News

"Light Makes Right"

July 11, 1998

Volume 11, Number 1

Compiled by Eric Haines, 1050 Craft Road, Ithaca, NY 14850 erich@acm.org . Opinions expressed are mine, not Autodesk's.

All contents are copyright (c) 1997,1998, all rights reserved by the individual authors

Archive locations: text version at http://www.acm.org/tog/resources/RTNews/text/
HTML at http://www.acm.org/tog/resources/RTNews/html/

You may also want to check out the Ray Tracing News issue guide and the ray tracing FAQ.


Contents:


Introduction

First, the Ray Tracing Roundtable (which is essentially a schmooze-fest for graphics programmers) will be on Thursday at SIGGRAPH at the Peabody Hotel (across the street from the convention center) in Bayhill Rooms I & II from 6:15 to 7:45 pm. This is the dead time between when papers and panels end and when the reception starts. Usual about 50 people gather, introduce themselves, then break up and talk until time's up.

An extremely cool idea was implemented at the Java One conference this year [thanks to John Foust for passing on a report about it]. The Java Rings given to attendees each held a microprocessor which ran a Java VM. Here's a quote from http://java.sun.com/features/1998/03/rings.html (go there for images and more info):

"Another applet on the ring calculated pixel values for a 3x3 tile that would contribute to a large fractal image being computed by Java Rings throughout the show. Each time an attendee would snap a ring into a reader, the calculated pixel values would be loaded onto a server collecting tiles to form a kind of fractal "quilt." The corresponding host application on the server would display the aggregate image throughout the conference, allowing people to watch the fractal grow."

I know another graphics application that's extremely parallelizable and the code can fit on a business card... It would be a challenge to see if there's enough room on a ring for ray tracing a procedural model. Really, for each ring, 9 pixels of a fractal image were probably computed in less than a second. A nice compact and complex database would be an interesting application. 4K *bits* of memory is not a lot, but it would be fun to try. There are 20 million of these processors deployed by the manufacturer (many on the ears of cows and whatnot). "Yep, this barn here produces 5000 gallons and traces 10 million rays a day..."

On another front, one of the more interesting sites I've come across is http://www.cut-the-knot.com. It's a pleasant collection of mathematical recreations with java applets helping to explain various phenomena and theorems. I particularly love the shapes of constant width page:

http://www.cut-the-knot.com/do_you_know/cwidth.html

Java with a purpose, used instructively and non-obtrusively.

This issue has a bias towards geometric operations. I'm privileged to present Ken Shoemake's tutorial on Plücker coordinates (not available anywhere else). There is also material on shrinking polygons and correcting surface normals. This issue also contains a huge roundup of links to resources. Some amazing things are in there, one of my favorites being the Hungarian model converter that almost no one's heard of, but that converts 90+ file formats.

In the next issue there will be a lot of interesting tidbits from various people, including new SPD timings. In terms of just plain speed, Sami Perttu tried Rayshade 4.0 with lots of tuned compiler options in gcc and Linux 2.0 and rendered the Sphereflake in 79 seconds on a 200 MHz Pentium. John Stone has been designing and implementing a parallel processing ray tracer that is extremely fast. He told me Sphereflake on a 4 processor DEC Alpha ran in 4.5 seconds. And on a 50 processor SGI Origin2000 at NCSA it ran in 1.5 seconds. The previous record (that I'm aware of) was 16 seconds, set by the AT&T Pixel Machine in 1988. I'm not sure what to be more amazed by, John's time (I recall back when it took me hours to render Sphereflake) or Sami's (a Pentium is one fifth the speed of the Pixel Machine at less than one hundredth the price). "If cars were computers, they'd now get 10,000 miles a gallon, go 6,000 miles per hour, and cost $5" and all that (of course, they'd also inexplicably blow up once a year, killing all occupants).

back to contents


Ray Tracing Roundup

There are way too many links here, partly because there are way too many cool resources on line, partly because I've been collecting these for about a year without catching up and writing them up here. Happy wading.

________

SIGGRAPH '98 Papers

With the help of Tim Rowley, I've gathered a lot of links on the electronic versions of the papers that will be presented at SIGGRAPH this year. They are available at:

http://www-imagis.imag.fr/Membres/Fredo.Durand/Book/sig98.html

Not all papers are available at the moment, if you know a link I have forgotten or missed, please let me know.

By the way, these are part of my collection of computer graphics links where you can find web pages of researchers, labs, conferences, image galleries, code, etc.

http://www-imagis.imag.fr/~Fredo.Durand/book.html

- Fredo Durand <Fredo.Durand@imag.fr>

[There are a great many links here, well worth a look. Especially useful is the list of researchers and their homepages. -EAH]

________

Algorithms, Come Get Your Algorithms...

Bookmark this site - it's pretty cool when you're thinking about solving a problem with software.

http://www.cs.sunysb.edu/~algorith/

The author of the site - Steven Skiena - has a book The Algorithm Design Manual that I bought down at the UW bookstore. It's great to page through when you're noodling on a problem and trying to break it down and see if other's have solved it in an efficient way. It's the first good book I've seen devoted to a practical application of over 75 classic algorithms (vs. the mathematical analysis and proof of correctness of algorithms).

The book comes with a CD that contains an entire HTML version of the book completely hyperlinked for cross-references and searchable. The CD also has over 30 hours of audio lectures in real-audio format complete with HTML lecture notes for an entire semester course on algorithms. The author did this for a course at SUNY and tossed it in.

[snippet passed on by John Foust <jjf@viewpoint.com>. -EAH]

________

Numerical Recipes

The book _Numerical Recipes_ is now online at http://www.nr.com in Postscript and PDF forms. Figures seem to be missing from the PDF files I've looked at, but you can't beat the price. In a reverse of normal practice, the text is free for viewing but the code must be purchased.

For a critique of the material presented in Numerical Recipes, see:

http://math.jpl.nasa.gov/nr/nr.html

Some of the users comments I know to be dated, for example the HEAPSORT bug I reported years ago and was fixed in the 1994 edition. But, it's still good to be aware that the methods given in Numerical Recipes are not the final word.

____

_Rendering with Radiance_ book

Greg Ward Larson and Rob Shakespeare (publisher: Morgan Kaufmann) have written a detailed and well-produced book on the use and algorithms behind the Radiance rendering system (http://radsite.lbl.gov/radiance/). Code, examples, documentation and more are included on a CD-ROM in the book. In case you hadn't heard, Radiance is an amazing free software system for physically accurate lighting design. The book starts with tutorials, then discusses different sorts of applications (lighting analysis, daylight simulation, stage lighting, etc.) and ends with 120 pages on calculation methods. These last chapters cover the system in much more depth than Greg Ward's original SIGGRAPH '88 paper, as well as discuss possible errors, extensions, and other developments since that time. The Table of Contents is available at:

http://www.mkp.com/books_catalog/1-55860-499-5.asp

____

The Geometry Toolbox

Authored by Gerald Farin and Dianne Hansford (A.K. Peters, Ltd.), this book looks to be useful for teaching analytic geometry for computer graphics. What is appealing to me is the copious use of illustrations to build an intuition about what the various operations actually do. Two sample chapters, along with the table of contents and index, are available online at:

http://eros.cagd.eas.asu.edu/~farin/gbook/gbook.html

This is a book I am definitely getting at SIGGRAPH. How can you turn down a book with a section called "Eigen Things"? Seriously, skimming the sample chapters, it looks to be a good combination of solid equations and explanatory text and illustrations, perfect for computer graphics programmers.

____

CRC Handbook of Discrete and Computational Geometry

This book, released in July 1997, is edited by Jacob Goodman and Joseph O'Rourke (who is the FAQ maintainer and frequent contributor to comp.graphics.algorithms). For an overview and sense of topics covered, see:

http://www.crcpress.com/cgi-bin/SoftCart.exe/catalog/8524.HTM?E+storecrc

If you already have the book, the errata listing is at:

http://cs.smith.edu/~orourke/books/errata.html

____

Error in Advanced Animation and Rendering Techniques

Page 90 of AART by Alan and Mark Watt, has an errror [verified by others -EAH]:

B0(u) = (1+u)cubed / 6

should actually read:

B0(u) = (1-u)cubed / 6

I have the proof if anyone cares.

- Chris Anthony <jsc@lds.co.uk>

________

Links to links to links to...

http://www.iro.umontreal.ca/~ratib/code/redirect.cgi?Goto=cg.htm - a nice collection of computer graphics research related links, especially papers.

http://mambo.ucsc.edu/psl/cg.html - you have probably seen this wonderful site already, a collection of links to computer graphics research centers. Less known, there is also a set of links specifically for facial animation research: http://mambo.ucsc.edu/psl/fan.html

http://www.3dlinks.com/ - Ultimate 3D Links, mostly for users of computer graphics (vs. programmers)

http://3dup.com - a searcher for links specifically for 3D graphics. The babelfished press release said, "We know accurately what the graphic artist need and unfortunately, we cannot get rid of our bugging creative ideas". We all know how that is. Anyway, easy to type, and worth a try.

http://home3.swipnet.se/~w-34077/dev/index.htm - a page for plug-in developers, with links to interesting code bits such as combustion and particle effects.

http://www2.inetdirect.net/~hastings/art.html#Utilities - lots of links for users of various free graphics software packages.

http://dns.uncor.edu/links/siterepo.htm - an incredibly thorough collection of links to free software and code on the web.

http://dns.uncor.edu/links/siteos.htm - the thorough collection, grouped by operating system. CP/M lives!

[thanks to Dan Hastings <hastings@inetdirect.net> for these last three. -EAH]

________

Kris Klimaszewski's Accelerated Ray Tracer

This ray tracing acceleration scheme was discussed by Kris and others in RTNv10n3. For test images, run times, and more, see his page at:

http://home.sprynet.com/sprynet/kriskk/RayTrace.htm

________

Rayshade on Linux and Windows98

I have an unofficial Linux port of Rayshade. I have tested it under Linux(gcc) and Windows98(msvc++). It works under both of those platforms, but I am not certain that it will function under the platforms on which it has traditionally been used.

The majority of the porting effort was converting the old-style 'Configure' script to the newer style gnu 'configure' script generated by 'autoconf'. If you are interested in it, I would appreciate feedback as to whether or not it still works under the platforms on which it was traditionally used.

You may find the ports at the following location:

http://www.primenet.com/~jarney/rayshade

- Jonathan S. Arney <jarney@primenet.com>

________

Laser

Laser is a Scheme-like 3D scene language, with a VR browser and ray tracer working with it. Interesting to see a networked ray tracer available for work online:

http://web.mit.edu/lbw/www/laser/laser.html

________

Ray Traced Evolution

L-Systems software with a ray tracer and an ability to export to POV-Ray and NFF formats, among others. It's at:

http://www.rz.tu-ilmenau.de/~juhu/GX/RTEvol/

________

An interesting Java project (sorry, no code) is located at:

http://www.cs.brown.edu/people/jks/thesis.html

It's a ray tracer with fast lighting editing, reminiscent of Sequin's work.

There's also an interesting summary of what Pixar teaches at their technical director's course:

http://www.cs.brown.edu/people/jks/pixar/pixar.html

________

History of Computer Graphics

A medium-sized history of computer graphics starts at:

http://www.disney.com/DisneyVideos/ToyStory/about/history/_1960s.htm

It'll take maybe a half-hour to read through, and you'll be better informed for it. There's a stress on the film industry in the history, and any time something to do with Disney or Pixar appears it's in bold, but it's nonetheless worthwhile reading.

________

The free ray tracing bibliography at http://www.acm.org/tog/resources/bib/ has been updated. A searchable version of this bibliography is located at:

http://liinwww.ira.uka.de/bibliography/Graphics/ray.html

________

Usenet Clippings and Links

If you read USENET you often find articles worth saving around. I've kept a bunch of these from the comp.graphics.* newsgroups over the years. When I hit some new topic I need to know about, it's worth grepping around this pile of files for tidbits.

Steve Hollasch is more organized than I am in this. He has created a sort of "best of comp.graphics.*" index, of posts and other material he feels are worth keeping available. It's huge, at:

http://research.microsoft.com/~hollasch/cgnotes/

____

Graphics Tutorials and Code

There are many great documents and code bits at David Eberly's site, http://www.cs.unc.edu/~eberly/. It's an impressive collection of material. Boris Kogan <bkogan@j51.com> comments:

"On his site you will find a ps file describing spline and quaternion calculus in gruesome detail. Above that for the coder in you he also provides a rather well implemented (if not complete) set of source files demonstrating the technique. I say not complete because Dave chose not to deal with rotations>360 degrees, and constraints are not covered at all. But these are minor points which can easily be overcome."

____

Franklin's Tutorials

Long-time contributor to the field of computer graphics Wm. Randolph Franklin has a number of tutorials on line at:

http://www.ecse.rpi.edu/Homepages/wrf/geom/top.html

There's a near-ultimate (this problem's never done) page on my favorite, point in polygon, as well as tutorials on 3D (and 4D) rotations, and some other common FAQs.

____

Tutorials on bump mapping, NURBS, particle systems, and many other topics are on-line at:

http://www.cs.wpi.edu/~matt/courses/cs563/

under the "Presentations" section. These pages are presentations given by students taking an advanced computer graphics course (so don't expect expert information, but the tutorials seemed sound enough).

____

Tutorials on all sorts of computer graphics related subjects are also available at:

http://www.scs.ryerson.ca/~h2jang/gfx_c.html

The tutorials are a little pedantic and don't give enough context for my tastes, but the breadth of topics covered is impressive and there are reasonable links and paper references in the articles.

____

A more hands-on set of tutorials on various effects and algorithms (particularly for games programming) can be found at:

http://www.users.globalnet.co.uk/~tomh/

____

All sorts of tutorials, algorithms, and other material is available at Paul Bourke's site:

http://www.mhri.edu.au/~pdb/

I particularly liked his online explanations of analytical geometry operations:

http://www.mhri.edu.au/~pdb/geometry/

____

An interactive (Java-based) tutorial from Brown University on color perception is at:

http://www.cs.brown.edu/research/graphics/research/illus/spectrum/

____

A wavelets tutorial, based for the most part on the wavelets course given at SIGGRAPH 96, is available at:

http://www.cs.wpi.edu/~matt/courses/cs563/talks/Wavelet_Presentation/

____

A nicely illustrated pair of tutorials on compositing for video and other applications are at:

http://www.tjfx.demon.co.uk/part_one.html
http://www.tjfx.demon.co.uk/part_two.html

____

A large number of tutorials for beginning users of 3D computer graphics software (especially for web designers) are located at:

http://www.webreference.com/3d/

____

Other resources can be found in the education area at SIGGRAPH's site:

http://www.education.siggraph.org/docs/C_and_I.htm

________

Schools for 3D graphics

http://www.pixar.com/jobsite/list-of-schools.html has a good list of post-secondary options for both technical directors and animators.

Tom Duff <td@pixar.com>

________

Chris Hecker's homepage

Is at:

http://www.d6.com/users/checker/

There are worthwhile articles and tutorials here. There is quite a lot on physical simulation of rigid body dynamics, and a good series of articles on practical perspective texture mapping on the PC. The PC compilers articles I found particularly interesting.

________

Quake 3 Lighting and Shading Techniques

There are two nicely done articles on the various multitexture shading methods used in the upcoming Quake 3 program at:

http://www.bigpanda.com/trinity/

________

Funding

If you have a project that you think might benefit the members of SIGGRAPH, you might be able to get funding for it:

http://www.siggraph.org/othercom/special-projects/

________

For those who are interested, my thesis is now available online:

Robust Monte Carlo Methods for Light Transport Simulation, Eric Veach, Ph.D. dissertation, Stanford University, December 1997

http://graphics.stanford.edu/papers/veach_thesis/

It describes techniques such as Metropolis light transport, multiple importance sampling, and bidirectional path tracing in more detail than in the corresponding papers. It also includes quite a bit of new material, including studies of:

  - the inherent limitations of unbiased Monte Carlo methods
  - new variance reduction techniques
  - the history of reciprocity principles and important exceptions to them
  - the derivation of a new reciprocity principle that applies to materials
    that transmit as well as reflect light  [i.e. BTDF's as well as BRDF's]

You can find the abstract and table of contents on the web page, as well as Postscript and PDF versions of the thesis.

- Eric Veach <ericv@graphics.stanford.edu>

________

Radiance related papers

Many papers relevant to Radiance, radiosity, and ray tracing are now available online at:

http://radsite.lbl.gov/radiance/papers/

These include:

The RADIANCE simulation software in the architecture teaching context, by Raphael Compagnon A Visibility Matching Tone Reproduction Operator for High Dynamic Range Scenes (LBNL Report 39882) Making Global Illumination User-Friendly (1995 Eurographics Workshop on Rendering) The RADIANCE Lighting Simulation and Rendering System (SIGGRAPH '94) Energy Preserving Non-Linear Filters (SIGGRAPH '94) Measuring and Modeling Anisotropic Reflection (SIGGRAPH '92) Irradiance Gradients (1992 Eurographics Workshop on Rendering) Adaptive Shadow Testing for Ray Tracing (1991 Eurographics Workshop on Rendering) A Ray Tracing Solution for Diffuse Interreflection (SIGGRAPH '88)

________

Vienna University of Technology papers

A number of technical reports concerning ray tracing are available online:

http://www.cg.tuwien.ac.at/research/TR/95/TR-186-2-95-06Abstract.html - Ray Tracing with Extended Cameras, by Helwig Loeffelmann, Eduard Groeller

http://www.cg.tuwien.ac.at/research/TR/95/TR-186-2-95-05Abstract.html - A Distortion Camera for Ray Tracing, by Pietro Acquisto, Eduard Groeller

See http://www.cg.tuwien.ac.at/research/TR/ for a full list of papers available online.

________

New Perspectives

It's cheering to know that old papers in hard to obtain proceedings can sometimes be found on the web. For example, the paper "New Perspectives for Image Synthesis," originally published in Compugraphics '92, is on the first author's web page (no images, though):

http://www.emse.fr/~mbeig/

It discusses different types of perspective transformations used in art which can become part of a ray tracer. That is, it truly *is* about new perspectives, it's not some fluffy, "what is new in the field (in other words, what am I doing)?" paper.

________

My old Master's thesis (from 1992) has made it to the Web:

http://www.graphics.cornell.edu/~westin/

Also available are:

- Stephen Westin <westin@graphics.cornell.edu>

________

3D Site newsletter

http://www.3dsite.com/n/sites/3dsite/newsletter/

____

The Rendering Times

An ezine for users of POV-Ray and Topas:

http://www.spake.org/rtimes/

____

Wavelet Digest

http://www.wavelet.org/wavelet/ - be over there now.

________

New Journal

The International Journal of High Performance Computer Graphics, Multimedia and Visualisation has been announced. For details see:

http://www.bath.ac.uk/~maxhpcg/

________

Near Real Time RT on a Pentium, part II

RTNv10n3:
> A fast (1-2 fps on a Pentium 90) ray trace demo with reflections and
> shadows on curved surfaces can be found at:
> ftp://ftp.cdrom.com/pub/demos/demos/1997/j/jlantani.zip
>It was faster than expected.

At demoscene there are more attempts at realtime raytracing.

For example:

ftp://ftp.cdrom.com/pub/demos/demos/1995/c/chrome.zip - my work ftp://ftp.cdrom.com/pub/demos/demos/1996/c/chrome2.zip - my work ftp://ftp.cdrom.com/pub/demos/demos/1996/i/ign_desp.zip ftp://ftp.cdrom.com/pub/demos/demos/1996/m/mfx_tgr2.zip ftp://ftp.cdrom.com/pub/demos/demos/1997/m/mfx_gma.zip ftp://ftp.cdrom.com/pub/demos/demos/1997/s/sk-iflic.zip

- Tamas Kaproncai <tomcat@rs1.szif.hu>

________

POVRay Webring

POVRay Ring is a group of sites dedicated to POVRay: image galleries, file archives, tutorials, "howto's", project info, source code patches and more, but always related in some way or another to POVRay. Currently there are over 75 sites, and more to come, so if you are looking for something about POVRay, you should check the ring, maybe it is there (faster than other ways of searching). If you have a page that meet the requirements, it is really easy to join (and free), fill out a form and put some HTML code in the page. To keep the sites joined we use the services of WebRing.

The POVRay Webring homepage is:

http://www.webring.org/cgi-bin/webring?home&ring=povrayring

The ring is administered by Guillermo S. Romero <famrom@ran.es> The Webring system can be reached at http://www.webring.org/

- Guillermo S. Romero <famrom@ran.es>

[To see an index of the POVRay web ring, visit http://www.webring.org/cgi-bin/webring?ring=povrayring;list]

____

There are many other rings relating to computer graphics. Visit http://www.webring.org/ and look under computers and graphics.

________

Helios on Unix

Dr. Ugur Gudukbay (gudukbay@CS.Bilkent.Edu.TR) and his students at the Department of Computer Engineering and Information Science, Bilkent University (Ankara, Turkey) have kindly ported my hopelessly Windows-centric Helios Radiosity Renderer to the UNIX operating environment.

If anyone is looking for C++ source code for a basic but effective progressive radiosity renderer, you can download helios_tar.tar from:

http://www.cs.bilkent.edu.tr/~gudukbay/home.html

- Ian Ashdown <byheart@direct.ca>

________

Radiosity & VRML

http://www.tisny.com/vrml/eai/radiosity/

- Jason Key <jasonk@eye.com>

[Pretty wild: run radiosity solutions over the web and see the output as VRML. It takes awhile to load the page; if you stop it early, go to the bottom of the page for the link to run the radiosity Java applet. -EAH]

________

Howell Book online

I just found that Jack Howell's "Catalog of Radiation Heat Transfer Configuration Factors" is now on line (it used to be only in a book that you could only find in some Engineering libraries).

It's at:

http://sage.me.utexas.edu/~howell/

Section C is not completely filled in, so perhaps it is still a work in progress. At least now everyone can have access to infamous cow factors:

http://sage.me.utexas.edu/~howell/sectionb/b-63.html

- Holly Rushmeier <holly@watson.ibm.com>

________

[In response to a query for wavelet radiosity on triangular meshes:] Philippe Bekaert and I have adapted wavelet radiosity to triangular meshes. (I think there are also some triangular coefficients listed in Peter Schroeder's thesis.)

I have a technical note online at:

http://www.cs.cmu.edu/~radiosity/notes/note-coeffs.[ps|pdf]

which discusses wavelet radiosity operations in a matrix-oriented setting, lists the necessary coefficients for these operations, and gives some examples of how to use them. It includes coefficients for the M[2-3], F[2-3] bases for both quadrilaterals and triangles.

You may also want to download Philippe et. al's RenderPark and/or my 'rad' radiosity program and try looking at the code. They can be found at:

http://www.cs.kuleuven.ac.be/cwis/research/graphics/RENDERPARK http://www.cs.cmu.edu/~radiosity/dist

- Andrew Willmott <a.willmott@cs.cmu.edu>

________

We have full hemispherical BRDF data for blue latex paint available at our web site:

http://www.graphics.cornell.edu/online/measurements/

The data were measured by Sing Foo, and we used them in our Siggraph'97 paper "Non-Linear Approximation of Reflectance Functions". I've just added some graphs of the function in the plane of incidence, to give a first impression of its shape. It's an interesting start for experiments.

- Eric Lafortune <eric@graphics.cornell.edu>

________

1998 Lightscape Image Contest

Some more breathtaking radiosity magic from Lightscape users. These are all new and it's well worth the while to have look.

http://www.lightscape.com/Contest98/

- Jason Key <jasonkey@mindspring.com>

[I usually don't list commercial sites, but these are downright amazing. The winner's reality vs. rendering comparison is great. - EAH]

________

The Visualization Toolkit

The code from the book _The Visualization Toolkit, An Object-Oriented Approach To 3D Graphics_ is available online at:

http://nswt.tuwien.ac.at/htdocs/vtk/

It's free, and looks impressive. If anyone has had experience with this system, please send a review.

________

SPD for Mac

The Standard Procedural Databases software is available for the Mac at:

http://www.geocities.com/SiliconValley/Horizon/4977/macspd.html

due to the efforts of Eduard Schwan.

________

Clouds

Some gorgeous computer generated clouds can be seen at:

http://www.seas.gwu.edu/student/sylee/cloud.html

________

Gamma Correction

A place for all your gamma correction needs:

http://www.cgsd.com/papers/gamma.html

Some interesting tutorials, links, and more. One of the better links is to the site by Charles Poynton (who has organized a color management course at SIGGRAPH this year):

http://www.inforamp.net/~poynton/Poynton-colour.html

________

Encyclopedia of Graphics File Formats book updates

O'Reilly's update page (which has new chapters for the second edition, i.e. has new formats which have come out):

http://www.ora.com/centers/gff/index.htm

The FAQ (by one of the authors) on file formats is at:

http://www.ora.com/centers/gff/gff-faq/index.htm

________

File Formats Galore

A huge collection of file format documentation is available at:

http://www.wotsit.org/

I've seen other file format collections, but this one is by far the most wide-ranging, including the usual 2D and 3D formats, movie formats, plus formats for spreadsheets, sound, printers, and all sorts of others. Unfortunately, there are no links to converters or code, just documentation.

For just 3D file formats, you might want to try:

http://www.octobernet.com/~brian/graphics/3D.formats.html

It hasn't been updated in a few years, but it's pretty comprehensive.

________

Metastream

A new streaming 3D file format for the web is at:

http://www.metastream.com/

Impressive demos; the models are way smaller than the same models saved as VRML (which still suffers from the lack of a binary file format). It will be interesting to see if this new format takes off, whether it competes with or complements VRML and also Microsoft's Chrome initiative.

________

Free Polygon Tessellators, take 2

In RTNv10n2 I summarized a number of free tessellator resources out there. At that time I commented that Narkhede & Manocha's tessellator did not handle holes. Now the code has been improved to do so, according to their web page. Find their explanation and code at:

http://www.cs.unc.edu/~dm/CODE/GEM/chapter.html

________

gpc

Someday we will run out of TIA's (three initial acronyms). Before that happens, gpc is a generic polygon clipper library, clipping anything against anything. The gpc polygon clipper handles degenerate cases cleanly:

Find the source and impressive examples at:

http://www.cs.man.ac.uk/aig/staff/alan/software/

There are also links there to other polygon clippers.

________

Lib3d

Lib3d is a high performance 3d C++ library distributed under the GNU Library General Public License.

Lib3d implements sub-affine texture mapping, Gouraud shading and Z-buffer rasterization, with support for 8, 16 and 32 bit depths.

Lib3d has been developed under Linux, and has been tested with DOS, Solaris and OSF/1 on Dec alphas.

Performance is a major design goal for Lib3d. Compared to other free renderers, Lib3d is about 3.5 times faster than TAGL v22, many times faster than Mesa, and perhaps half as fast as a good commercial renderer.

Location: http://www.ozemail.com.au/~keithw/

____

CIDLib

A free C++ class library for Windows NT. Includes an object oriented extensible ray tracer and fractal generation engine as part of it. It's at:

http://www.charmedquark.com/

________

Alice

Alice is a 3D Interactive Graphics Authoring/Programming Environment. The goal of Alice is to make it easy for novice programmers to develop interesting 3D environments and to explore the new medium of interactive 3D graphics. It runs on Windows 95 and Windows NT 4.0 with Direct3D.

Location: http://alice.cs.cmu.edu/

____

AC3D

AC3D is a free modeller which works on various flavors of Unix, and exports to VRML, RenderMan, POV-Ray, and other formats. Get it at:

http://www.comp.lancs.ac.uk/computing/users/andy/ac3d.html

Also available at this site is 3DC, a free DOS 3D model converter (sorry, no source) by Zoltan Karpati of Hungary which converts to and from a huge number of formats. The quality of the conversion is nothing spectacular, but the format list is impressive (92 different file types!).

____

Breeze Designer

A free modeler for POV-Ray, for Windows 95 and NT. While primarily for POV-Ray, it also exports to VRML, RenderMan, DXF, and PolyRay formats:

http://www.imagos.fl.net.au/

____

Moonlight Creator

A free modeler, with source available, for Windows 95/NT (uses OpenGL) and Linux. Has NURBS and object/polygon/vertex editing, imports DXF, OFF, and 3DS ASC, and exports DXF, Rayshade, POV-Ray, RIB, and VRML 1 & 2. Supports True Type fonts. Does not support textures yet. Does radiosity lighting and raytraced rendering:

http://www.cybersociety.com/moonlight/

____

bCAD

a DOS modeler, free, sounds quite stable, includes a ray tracer in it. Imports and exports 3DS ASC and Sense 8 NFF. Check out the rave review at "The Unofficial bCAD appreciation page":

http://www.wooldale.demon.co.uk/bcad.htm

____

FORM

This is an IBM Windows/DOS program for doing Latham-like L-systems, exports direct to image files or to VRML, DXF, POV-Ray, VIVID, and PLG:

http://www.netlink.co.uk/~snaffle/form/form.html

The language looks a bit intimidating to learn, but the program's pretty accessible: just start up WFORM ("WFORM -res2" is better on faster machines, more screen space), open a .FRM file from the SHAPES or OTHERS directories, and hit "Go!". If the shape looks interesting, go to "MutateMode!" and hit "Go!" again. The shape is used to produce 3 offspring, a la Todd and Latham. Double click on an offspring (or the parent again), and you get more offspring from that. I *think* if you set the Mutation Settings under File to a lower value you get less variation. Pretty fun and quick to start using.

To actually save your creation you seem to have to do a little two-step: save it out as filename.frm, then run "FORM -vrml filename.frm" and the file temp.wrl is output. Drop this in your browser and there it is.

Some images from FORM are at:

http://www.netlink.co.uk/~snaffle/form/formgall.html

________

CAD Model Viewer

Most free model viewers are concerned with polygonal based surfaces for rendering applications. So, it is nice to see a new free viewer come out for CAD related formats, such as IGES, SolidWorks, ISO G-Code (whatever that is), as well as CAD surface description file types such as STL and VRML. See:

http://www.actify.com/3DView/3DView.html

________

Implicit & Parametric Surfaces for POV-Ray

If you want to add these to POV-Ray, go now to:

http://atrey.karlin.mff.cuni.cz/~0rfelyus/povray.html

________

3D Implicit Function Viewer

A free demo version of an implicit function viewer is available at:

http://mathware.com/html/cyclone.html

If you play with implicit functions at all, it's worth a look.

________

L-Parser Front End

On a related note, LSys32 is a graphical shell to the L-Parser program at:

http://www.mindspring.com/~chlichti/html/lsys32.html

________

LOD for VRML

There is an interesting application called LODestar at:

http://www.cg.tuwien.ac.at/research/vr/lodestar/

It works only on VRML 1.0 files, but has some nice features. It cleans up the original VRML file (eliminating duplicate data), and has the ability to generate lower polygon count level of detail versions of the model. If you combine this utility with Keith Rule's Crossroads 3D file translator at http://www.europa.com/~keithr/ (which reads and writes VRML 1.0), you have a nice poor-man's polygonal model simplifier for any format that Crossroads can write (which is quite a few at this point).

________

Free Java 3D vecmath library

An unofficial, free implementation of the Java 3D API vecmath library is available at:

http://www.esm.co.jp/java/vecmath/

____

The code for _Computer Graphics for Java Programmers_ can be downloaded from:

http://home.wxs.nl/~ammeraal/grjava.htm

________

Macbeth photo mosaic program

Macbeth is a Unix based program (with source) which uses small images as pixels for making large images. A little bit hard to describe - see the examples on his page to know what it is:

http://kunst.uib.no/~stig/Macbeth/

________

gd

gd is a graphics library which is handy for drawing vectors, regions, text, and compositing other images into a GIF. It's free, with source.

http://www.boutell.com/gd/

The most tantalizing thing about version 1.3 is that the GIF compresser, called miGIF, appears to both get around the LZW patent and is also efficient. It basically is a run length encoder (which is not patentable) which uses the LZW's table to store runs. Such an encoder is ideal for 'gd' because it generates images which typically have solid color areas. I wouldn't bet the house that miGIF is patent free (nightmares of saying, "Your honor, LZW works likes this..." come to mind), it takes a court to "prove" this, but technically it looks like it is.

________

Lens Flare

Everyone's favorite special effect, there's some free source code at http://www.geocities.com/SiliconValley/Campus/4128/Lensflare.html to do it.

________

Free Textures

Five years ago free textures were pretty rare; now they're fairly common. Now the trick is separating the wheat from the chaff. Some fairly nice and pleasantly organized free textures are available at:

http://axem2.simplenet.com/heading.htm

An old site with a large number of tiling (and non-tiling) textures is at:

http://www.mhri.edu.au/~pdb/texture/

A little care should be taken with redistributing these textures, as some are possibly copyright protected.

________

Grafica Obscura

If you have not visited this site lately, do so:

http://www.sgi.com/grafica/index.html

I particularly enjoyed "Synthetic Lighting for Photography":

http://www.sgi.com/grafica/synth/index.html

Explore on your own, there's something for everyone.

________

Midpoint Algorithm

On the fast midpoint line drawing algorithm and its application to texture mapping:

http://www.oiri.demon.co.uk/texmap/texmap.htm

________

This is definitely off the topic, but I find it so amazing that I must mention it. This site is for a computer game company that has gone under but which decided, as a last act, to release the complete source and art for its last release, an action game using Direct3D:

http://www.47-tek.com/source.htm

While I'm on the topic of games, for a true nostalgia trip visit:

http://www.davesclassics.com/

a labor of love or something, devoted to PC emulators of old arcade machines and defunct platforms.

________

Inexplicable, and worth a quick look:

http://www2.sva.edu/studio96/soojeong/

back to contents


Plücker Coordinate Tutorial, by Ken Shoemake (ks@emanon.net)

Plücker 3D line coordinates are concise and efficient for numerous chores. Dot products and cross products reveal their geometry, without the need for determinants. For the impatient (and aren't we all a little?), results come first, then explanations.

On notation: Frequently 3D graphics uses a 3-tuple, (x,y,z), without concern for whether it represents a vector or a point. When being more careful, (U:0) will be the homogeneous coordinates of vector U, with U = (Ux,Uy,Uz), and (P:1) -- or (P:w) -- the homogeneous coordinates of point P, with P = (Px,Py,Pz). The origin is then (O:1), with O = (0,0,0), and subtracting it from a point creates a vector. The cross product PxQ is the 3-tuple (PyQz-PzQy,PzQx-PxQz,PxQy-PyQx), and the dot product U.V is the number UxVx+UyVy+UzVz. A direction is a vector with length ignored. A plane has equation ax+by+cz+dw = 0, or D.P+dw = 0, so its coordinates are [a:b:c:d], or [D:d], with D = (a,b,c) perpendicular to the plane. Planes [D:0] contain the origin. Colon (":") rather than comma (",") proclaims homogeneity.

Here are common Plücker 3D line computations collected in one place. All lines are ordinary Euclidean lines, not projective oddities like lines at infinity.

  @ L = {U:V}, with 3-tuples U and V, with U.V = 0, and with U non-null.

  @ L = {P-Q:PxQ}, for P and Q distinct points on L.
  @ L = {U:UxQ}, for U the direction of L and Q a point on L.
  @ L = {qP-pQ:PxQ}, for (P:p) and (Q:q) distinct homogeneous points on L.
  @ L = {ExF:fE-eF}, for [E:e] and [F:f] distinct planes containing L.

  @ {U1:V1} =? s{U2:V2} tests if L1 = {U1:V1} equals L2 = {U2:V2}.
  @ s > 0 if L1 and L2 have same orientation.

  @ (V.V)/(U.U) is the minimum squared distance of L from the origin.
  @ (VxU:U.U) is the point of L closest to the origin.
  @ [UxV:V.V] is the plane through L perpendicular to its origin plane, for
        non-null V.

  @ (VxN-Un:U.N) is the point where L intersects plane [N:n] not parallel to L.
  @ [UxP-Vw:V.P] is the plane containing L and point (P:w) not on L.
  @ [UxN:V.N] is the plane containing L and direction N not parallel to L.

  Let N, N1, N2 be unit vectors along the coordinate axes, with U.N non-zero.

  @ (VxN:U.N) is a point on L if N is not perpendicular to U.
  @ U and this point both satisfy a plane equation [E:e] if the plane
        contains L.
  @ Represent L as U and this point to transform by non-perspective
        homogeneous matrix.
  @ Represent L as two points to transform by perspective homogeneous matrix.

  @ [UxN1:V.N1] and [UxN2:V.N2] are distinct planes containing L.
  @ P satisfies both these plane equations if L contains P.

  @ Pnt(t) = (VxU+tU:U.U) parameterizes points on L.
  @ Pln(t) = (1-t^2)[UxN1:V.N1]+2t[UxN2:V.N2] parameterizes planes through L.

  @ U1.V2 + U2.V1 =? 0 tests if L1 = {U1:V1} and L2 = {U2:V2} are coplanar
        (intersect).
  @ Sum positive if right-handed screw takes one into the other; negative
        if left-handed.
  @ U1xU2 =? 0 tests if lines are parallel.
  Let N be a unit vector along a coordinate axis, with (U1xU2).N non-zero.
  @ ((V1.N)U2-(V2.N)U1-(V1.U2)N:(U1xU2).N) is the point of intersection, if
        any.

  @ [U1xU2:V1.U2] is the common plane for non-parallel lines.
  Let N, N1, N2 be unit vectors along the coordinate axes, with U1.N non-zero.
  @ [(U1.N)V2-(U2.N)V1:(V1xV2).N] is the common plane for parallel distinct
        lines.
  @ [U1xN1:V1.N1] is the common plane for equal lines through origin.

Here are two related tricks, a lagniappe, as they say in New Orleans.

  Let P be the point (x,y,z).
  @ [(-1,0,0):x] and [(0,-1,0):y] and [(0,0,-1):z] are independent planes
        through P.

  Let [E:e] be a plane and N, N1, and N2 unit coordinate axis vectors with
        E.N non-null.
  @ Point (-eN:E.N) and distinct direction vectors ExN1 and ExN2 lie in the
        plane.

Note: E.U = 0 if U is a direction vector in plane [E:e]. If P is in the plane, so is P+U.

Warning: In reality, line intersections, parallelism, and various other alignments have vanishingly small probability. Small perturbations destroy them, and so numerical tests may need the robustness of error bounds.

Now we pause a minute to let the cookbook crowd rush off to write code. The overachievers may want to drift off to prove everything for themselves. All gone? Then the rest of us can try to build a little intuition, so as to understand the results.

The standard determinant definition of Plücker 3D line coordinates takes two distinct points on line L, call them P and Q, written homogeneously in two columns as follows:

  [Px Qx] row x
  [Py Qy] row y
  [Pz Qz] row z
  [Pw Qw] row w
Make all possible determinants of pairs of rows. Only six combinations are independent; these are the Plücker coordinates. See geometry yet? Probably not. But set the w's to 1, and look again.

Rows x and w (in that order) give Px-Qx. Also rows y and w give Py-Qy, and rows z and w give Pz-Qz. So define U = P-Q. That's half the Plücker coordinates. Rows y and z give PyQz-PzQy. Hmm, look familiar? Sure enough, rows z and x, and rows x and y, also give cross product components. So we define V = PxQ as the other half of the Plücker coordinates. Using L = {U:V} = {P-Q:PxQ} we can think geometrically, not algebraically.

  Example: P = (2,3,7), Q = (2,1,0). Then L = {U:V} = {0:2:7:-7:14:-4}.

We just use familiar properties of dot products and cross products. The dot product of any two vectors A and B is 0 just when they are perpendicular, and the cross product of A and B is a vector that always is perpendicular to both A and B (or is null). The squared length of A is A.A, and A.B = B.A. In contrast, AxB = -BxA, implying AxA = (0,0,0). Thus AxB nulls any component of B parallel to A, and rotates the rest of B 90 degrees. When A and B are perpendicular and of unit length, this implies Bx(AxB) = A = (BxA)xB. Both dot and cross products distribute over sums and scales, so A.(aB1+bB2) = a(A.B1)+b(A.B2) and (aA1+bA2)xB = a(A1xB)+b(A2xB), for example.

Now clearly U = P-Q gives the direction of the line; and V = PxQ (if it's non-null) is perpendicular to the plane through P, Q, and the origin. Less obviously, the colon is there because moving P and/or Q scales U and V together. Think about it. We know P = U+Q, with U some multiple of a fixed unit vector. But then V = PxQ = (U+Q)xQ = UxQ, so moving P clearly scales V the same as U. All variation in Q also comes from adding multiples of U to the point T where a vector from the origin meets the line perpendicularly; in other words Q = sU+T. But that means V = UxQ = Ux(sU+T) = UxT, and T is a fixed point of L that does not depend on P or Q. So if either P or Q moves, the length of U changes, and with it the length of V, by the same scale factor. Clearly we can also generate coordinates directly from a ray representation, (U,Q), a direction and a point. We know that U is the direction of L, which we can normalize; then the length of V gives the minimum distance from L to the origin, ||T||, and so (T.T) = (V.V)/(U.U).

  Example. P = (2,3,7), Q = (2,-1,-7). Then {U:V} = {0:4:14:-14:28:-8}.
           Squared distance from origin is 261/53.
  Example. U = (2,1,0), Q = (2,1,0). Then {U:V} = {2:1:0:0:0:0}.
           Squared distance from origin is 0.

Since a line is uniquely determined by its direction and its vector displacement from the origin, there is a one to one correspondence between lines and Plücker coordinates. Lines in 3D have four degrees of freedom, but the {U:V} pair has six numbers. Obviously homogeneity accounts for one freedom. The second comes from the fact that U.V = 0, so not all pairs are valid lines. Nevertheless, two lines are distinct if and only if their Plücker coordinates are linearly independent. That is, the test for equality is like that for points given as homogeneous coordinates.

  Example. {0:2:7:-7:14:-4} is the same line as {0:4:14:-14:28:-8}.
  Example. {0:2:7:-7:14:-4} is not the same line as {2:1:0:0:0:0}.

Now still thinking geometrically, look at dual coordinates, defined from two plane equations of the form ax+by+cz+dw = 0, namely E.P + e = 0 and F.P + f = 0. We know that as vectors E and F are perpendicular to their respective planes. Clearly ExF, being perpendicular to both, must be the direction of L, their intersection. Any point P on L satisfies both equations, and also satisfies the linear combination (fE-eF).P = 0. Thus the vector fE-eF defines a plane through the origin that contains L. So miraculously, it turns out that {U:V} = {ExF:fE-eF}. Assuming neither defining plane passes through the origin, we can normalize so e and f are 1, and the duality is {P-Q:PxQ} = {ExF:E-F}.

  Example. [E:e] = [1:0:0:-2] and [F:f] = [0:7:-2:-7]. Then {U:V} =
        {0:2:7:-7:14:-4}.

The striking similarity of the point and plane definitions tell us Plücker 3D line coordinates precisely balance these extremes. Many computational benefits accrue. Also, many questions come in dual pairs, with the answers for one obtained by swapping U and V in the answers for the other.

We know, for example, that [V:0] is an origin plane through L (if V is not null), and that (U:0) is a vector in the direction of L, each unique. The point T = (VxU:U.U) of L is perpendicular to (U:0), meaning T.U = 0, because V = UxT, so VxU = (U.U)T. Dually, the plane [UxV:V.V] through L is perpendicular to plane [V:0].

  Example. {U:V} = {0:2:7:-7:14:-4}. Then T = (-106:49:14:53) is point
        closest to origin.
            Plane perpendicular to [V:0] is [106:-49:-14:261].

What point do L and a given plane [N:n] have in common? Consider first an origin plane, [N:0]. It meets the [V:0] plane in a line of points (VxN:w), and to meet the [UxV:V.V] plane w must satisfy w(V.V) = (VxU).(VxN) = (V.V)(U.N). Therefore the common point is (VxN:U.N) when n is 0, or (VxN-nU:U.N) in general. Dually, the plane that L has in common with a given point (P:w) is [UxP-wV:V.P]. For a vector (N:0), this is [UxN:V.N].

  Example. {U:V} = {0:2:7:-7:14:-4} and [N:n] = [0:0:1:0]. Intersection is
        (14:7:0:7).
           [N:n] = [0:0:1:-7]. Intersection is (14:21:49:7).
           (P:w) = (2:0:0:1). Common plane is [7:0:0:-14].
           (N:0) = (1:1:1:0). Common plane is [-5:7:-2:3].

These are important results, so let's take it again more slowly. The vector (VxN:0) is perpendicular to both V and N, as is any scalar multiple, (VxN:0)/w. Since [N:0] and [V:0] both contain the origin, (O:1), they also contain point O + VxN/w, which scales by w to give (VxN:w) in homogeneous form. Now a point (P:w) lies in plane [UxV:V.V] if it satisfies the equation (UxV).P+(V.V)w = 0. Noting UxV = -VxU, this is w(V.V) = (VxU).P. Substituting, the point we want satisfies w(V.V) = (VxU).(VxN). We deduce w = U.N by showing (VxU).(VxN) = (V.V)(U.N). The cross product with V rotates and scales plane [V:0], which contains U, and nulls any component of N parallel to V. Since the latter contributes nothing to the dot product with U, we have our desired result. If V is null, (VxN:U.N) is still a point of intersection, the origin. However when the line and plane are parallel, they either intersect everywhere or nowhere, and the formula fails.

From these few formulae we can produce a number of other useful results. To transform a line by a matrix without perspective, we first convert the line to (direction,point) form, transform that pair, then convert the result back to Plücker form. For this and other reasons we want the quickest way to find a point on L = {U:V}. For example, this also gives the necessary data to determine if L lies in a given plane. Notice that we can easily generate more, using U. (This is necessary to apply transforms with perspective, which require a pair of points.) But (VxN:U.N) gives points on L, and choosing N cleverly will avoid multiplies. Merely find a non-zero component of U, and let N be a unit vector in that direction.

  Example. {U:V} = {0:2:7:-7:14:-4}. Take N = (0,1,0), giving point
        (4:0:-7:2) on line.
            Plane [1:0:0:1] does not contain the point, so it does not
                contain the line.
            It does contain direction [0:2:7:0], so is parallel to the line.

To test if a point P is on L, we should use two independent plane equations. The obvious idea is to dualize what we just did using [V:0] and [UxN:V.N], with N a unit vector in the direction of a non-zero component of V. Yet this may fail. We always have a non-null U, but lines through the origin give a null V. Still, we can work with what we have. Let N, N1, and N2 be unit vectors for the three coordinate axes, with N in the direction of a non-zero component of, not V, but U. Then N1 and N2 give two suitable planes, [UxN1:V.N1] and [UxN2:V.N2].

  Example. {U:V} = {2:1:0:0:0:0}. Take N = (1,0,0), N1 = (0,1,0), N2 = (0,0,1),
        giving planes [0:0:2:0] and [1:-2:0:0] through line.
            Point (2:3:0:1) lies only in the second plane, so is not on the
                line.

Every point on L is a weighted sum of (U:0) and (VxU:U.U), so a parametric equation for all points on L is Pnt(t) = (VxU+tU:U.U). Dually, a parametric form for planes through L is Pln(t) = (1-t^2)[UxN1:V.N1]+2t[UxN2:V.N2], a weighted combination of the two planes we learned how to generate a moment ago. This latter pair of weights, 1-t^2 and 2t, is perhaps overly elaborate, but chosen as points on a rationally parameterized circle (x:y:w) = (1-t^2:2t:1+t^2). Any way to get all possible ratios of weights will do.

  Example. {U:V} = {0:2:7:-7:14:-4}. Pnt(t) = (-106:49+2t:14+7t:53).
  Example. {U:V} = {2:1:0:0:0:0}. Pln(t) = [2t:-4t:2(1-t^2):0].

If two lines intersect, they are coplanar. This latter condition we can test as follows. Suppose L1 = {U1:V1} and L2 = {U2:V2}. The common plane containing both L1 and U2 is [U1xU2:V1.U2], while that containing L2 and U1 is [U2xU1:V2.U1]. Since U1xU2 = -U2xU1, coplanarity demands U1.V2 + U2.V1 = 0. When the two lines are parallel, U1 and U2 give the same direction and the plane formulae are invalid, yet the test still works.

If we want a formula for a common plane even so, we can try a linear combination of V1 and V2 for the normal, since both are perpendicular to the common direction. Find a non-zero component of U1, and let N be a unit vector in that direction; then if V1 and V2 are not both null, use [(U1.N)V2-(U2.N)V1:(V1xV2).N]. Otherwise L1 and L2 are not only parallel, but identical, and pass through the origin; generate a plane for L1 using the standard method. Perhaps the reader can devise a uniform method for generating a common plane, however small perturbations generally have large consequences for this situation.

We cannot hope to find a point of intersection for parallel lines, but otherwise a suitable formula is actually the dual, ((V1.N)U2-(V2.N)U1-(V1.U2)N:(U1xU2).N), where N is a unit axis vector independent of U1 and U2. This is less computation than its size suggests. It can be derived as the plane through L2 in the direction N, [U2xN:V2.N], intersected with L1, (V1x(U2xN)-U1(V2.N):U1.(U2xN)), followed by two cross product identities, Ax(BxC) = (A.C)B-(A.B)C, and A.(BxC) = (AxB).C. When neither V1 nor V2 is null, the far simpler formula [V1xV2:U1.V2] will suffice; it is the dual of the common plane [U1xU2:V1.U2].

  Example. L1 = {0:2:7:-7:14:-4} and L2 = {2:1:0:0:0:0} are coplanar.
            Lines are not parallel.
            Common plane is [-7:14:-4:0].
            Taking N = (1,0,0), intersection point is (-14:-7:0:-7).

Tempting as this geometric development is, it conceals the generality of the algebra. Plücker 3D line coordinates are only one special case (albeit a very useful one) of Grassmann coordinates.

Using Grassmann coordinates we can uniformly manage points, lines, planes, and such (generically, flats) in spaces of any dimension. We can generate them, intersect them, and so on, with simple equations. There are fewer special cases, such as lines given by two points versus point and direction. Three planes through a point or three points on a plane (in 3D) use the same algebra as two planes through a line.

Two solid references are Stolfi's doctoral dissertation at Stanford (and later book), and Hodge and Pedoe's classic multi-volume text, _Methods of Algebraic Geometry_, available in paperback from Cambridge.

In 3D, Plücker line coordinates can be extended to wrenches and twists, known as screw coordinates. These cleverly employ all six degrees of freedom to describe forces and motions. The results have proved useful for kinematic investigations, as described for example in Mason and Salisbury, _Robot Hands and the Mechanics of Manipulation_, MIT.

(there's more on Plücker coordinates in the previous RT News)

back to contents


A Short Note on Kalra and Barr's Algorithm, by Andrei Sherstyuk (ash@cs.monash.edu.au)

This message is intended for folks who might be interested in implementing this algorithm. The algorithm was published as "Guaranteed Ray Intersection with Implicit Surfaces", in SIGGRAPH '89 proceedings, pp. 297-306.

Kalra and Barr's algorithm has been around for almost 10 years and gained a good reputation among implicitly-minded ray-tracing people. Still, I could not find a public-domain ray-tracer that implemented this algorithm. So I had to write it from scratch.

En route, I found a typo in the math appendix of the paper, apparently introduced during typesetting. In the paper, there is a brief description how to compute L and G for Gaussian potentials, aka Blinn's blobs:

    f(r) = B exp {-A r^2},

where r^2 is a squared distance to the center of the blob. (page 305).

I did not check the computations of L (the Lipschitz constant for the functions itself). However, computations of G must be corrected in the following way: the 2nd directional derivative h(t) is given as:

    h = -2.0*AB*exp(-A*r2)*(k1 - A*(k2 + t*k1)*(k2 + t*k1));

The correct expression is:

    h = -2.0*AB*exp(-A*r2)*(k1 - 2.0*A*(k2 + t*k1)*(k2 + t*k1));
                                 ^^^

The result of this typo is that the G-values for each blob come out smaller than they really are. This may cause the algorithm to underestimate the rate of change of the field function and start closing on the root in the interval where the function is NOT monotonic.

In principle, this could cause divergence (if Newton's method is used) or the first intersection may be missed (if regular falsi is used, which may converge to the second root).

In practice, with all datasets that I tried this bug does not surface. The reason is the following: the collective G-value for a sum of several blobs is calculated as a sum of G-values computed for individuals blobs. This is a very conservative result. In a way, the algorithm is very self-protective and always sets the safety limits basing on the worst-case behavior of the collective field function, which in practice (almost) never happens. Therefore, a little loosening of G only helps the speed at the expense of safety.

However, since so much math is involved already, it makes sense to do it by the rules, which makes the algorithm absolutely reliable.

To finish, the plot of h(t) (Figure 21) should be viewed upside-down. This minor inconvenience is not really important for the algorithm, but also should be corrected to obtain peace of mind after all these troubles.

back to contents


Origins of Point In Polygon, Take 10..., by Neil Stewart (stewart@iro.umontreal.ca)

[Chris Schoeneman tracked the origin of the point in polygon algorithm back to 1962, see RTNv4n1. However, the solution to the problem dates much further back. Neil Stewart wrote this in some correspondence. -EAH]

Taking the parity of the number of crossings of a fixed direction, as a definition of the winding number is attributed to Poincare in the book:

A Combinatorial Introduction to Topology. Michael Henle. Freeman and Company, 1979.

From page 49:

"Here is an alternative method for computing the winding number, suggested by Poincare himself. Instead of keeping track of the vector V(P) as P traverses the path 'gamma', we watch just one particular direction of our choosing and record only the times that the vector P points in that direction. If the vector V(P) passes through the direction going counterclockwise, we count plus one; if it passes through the direction going clockwise, we count minus one; and we count zero if the vector only comes up to our chosen direction and then retreates [sic] back the way it came. For the distinguished direction we choose due north."

[Neil is working on an algorithm similar to the one in Section 2 of the paper "Ray Tracing Trimmed Rational Surface Patches", by Nishita, Sederberg, and Kakimoto, Computer Graphics (24), No. 4, Aug. 1990, 337-345. The clever bit of these curve algorithms is the use of convex hulls around the curves. For example, with a test ray pointing north, if you know that your test point is south of the convex hull and you know that one endpoint of the curve is west of the ray and one is east, then you know the ray crosses the curve an odd number of times. This is all you need for an inside-outside test - you do not have to compute the actual intersection. Similarly, if both endpoints of a curve are to one side of the ray, you know the ray hits the curve an even number of times. -EAH]

back to contents


Info on REYES Algorithm, by Robert Speranza and Tom Duff (td@pixar.com)

Robert Speranza wrote on comp.graphics.rendering.renderman:

Basically, the REYES algorithm involves taking the rendering geometry and dicing up into micropolygons that are less than one pixel in size in screen space and then shading them. Once they are all shaded (which usually involves sampling their midpoints because they are so small that they are at the Nyquist limit for the display device), a filter is applied to antialias the resulting values into the pixels you see in the final image. This is performed for each scan line which is why PRMan does not raytrace. This technique does not mix well with raytracing since micropolygons are discarded as each scanline is rendered.

____

Tom Duff replied:

Almost.

A better (certainly more long-winded) summary might be:

1) Divide the screen into smallish (typically 4x4 or 16x16 pixel) rectangular buckets. (Bucketing is done just for memory saving & is not essential to the algorithm.)

2) Read geometry into the bucket list. An important feature of Reyes is that the geometry it renders need not be just polygons, but can also be higher-order curved surfaces like quadrics, NURBS and Catmull-Clark subdivision surfaces. Each primitive is stored with the first bucket to be processed in which it appears (actually, *might* appear, based on bounds that could be too conservative.)

3) Loop through the buckets, examining all the geometric primitives. Primitives that fail a screen-space flatness test are subdivided and the pieces rebucketed. Those passing the test are diced into grids of micropolygons, which are shaded. The intent is that micropolygons be so small that their shape is not discernable in the final image. Typically this means that their edges are about 1/2 the pixel spacing. The shading system is fully programmable, and interprets shaders in a SIMD manner, running on all points in the grid simultaneously. The three important features of this scheme are that interpreter overhead is amortized over many micropolygons, that values of all variables and interpreter temporaries are available at all points on the grid, allowing the interpreter to provide spatial derivatives of arbitrary quantities, and that shaders have the ability to alter geometry, since no hidden-surface decisions have been made yet. Derivatives give a straightforward way to compute surface normals, and to estimate sampling rates for anti-aliasing. Contrary to Speranza (above) micropolygons are not sampled at their midpoints. Rather, color is computed at vertices, with the intent that it be Gouraud-interpolated across micropolygons.

4) After shading, break grids apart into individual micropolygons, which are hidden using a Z-buffer algorithm. The Z-buffer samples are randomly jittered in space, time and lens position to allow anti-aliasing, motion blur and depth-of-field blur. To handle transparent surfaces, each sample has a list of visible micropolygons. After all micropolygons have been sampled, those that overlap other buckets are forwarded to the appropriate bucket lists. Transparent values in the Z-buffer sample lists are collapsed to single pixel values by compositing, and the final sample values are filtered to produce pixel values.

I'm not sure why you say that Reyes is incompatible with ray tracing. All that is required is to make a copy of the input geometry in a geometric search structure when it's read, and trace rays when a shader requires it. PRMan doesn't ray trace because we don't see a demand for it, not because it's hard to do - it's not.

[Thanks to Andy Gibson <gibsona@jedi.nwnet.co.uk> for passing this on. -EAH]

back to contents


Polygon Shrinking, by Dave Rusin (rusin@vesuvius.math.niu.edu) and Jeff Erickson (jeffe@cs.duke.edu)

[This is a fairly useful topic, as a common modeling operation is to take an outline and expand it while moving it along a path. For example, beveled letters are done using this operation. From what I've seen, most programs usually do give self-intersecting output. This usually doesn't matter - about the only case I recall where I ever saw some problems was with one of the Microsoft Wingdings hand glyphs. -EAH]

<bpangtay@ci.sat.tx.us> wrote on sci.math:
>Given a polygon defined in 2-D space as a series vertices (cartesian
>coordinates). How do I define a new polygon which is equal to the original
>polygon plus a buffer of a specified width around perimeter of the polygon?

What do you want for an answer when, say, the polygon is a triangle? I can describe another triangle whose sides are parallel to the original triangle's sides but are a perpendicular distance 'd' away; but the new one's vertices are further than 'd' units away from the original -- is that OK?

Getting the new edges is trivial: every line in the plane may be written in the form a x + b y = c for a unique unit vector (a,b) pointing to the outside of the polygon. The line parallel to this but d units out is given by a x + b y = c + d.

>I need it in a formula that can easily be reproduced in a program. Thanks for
>your help.

Given the ordered list P0, P1, ..., Pn = P0 of points traversing the polygon counterclockwise, compute in turn the vector (r,s) = P_(i+1) - P_i the outward normal (s,-r) the unit outward normal (a,b) the new-line L_i: a x + b y = (a x_i + b y_i) + d the intersection Q_i with the previous new-line L_(i-1) for each i. These points Q_i are the vertices of your new polygon (in what I assume is the preferred format for specifying a polygon).

Note that you said "easily", not "efficiently" or "stably". If I did this for a living I'd probably write a real algorithm, not just a naive translation of mathematics into code :-) In particular, for nonconvex polygons, you have to watch out for self-intersections etc.

If you really need the set of points which are a perpendicular distance away from the original polygon, you need to replace the corners of the new polygon with circular arcs. This new curve is the _envelope_ of the original one; see e.g.

http://www.math.niu.edu/~rusin/known-math/index/14HXX.html

____

Jeff Erickson <jeffe@cs.duke.edu> writes:

In particular, for nonconvex polygons, you have to watch out for self-intersections etc. and this is hard! Programs that compute offset polygons, like Adobe Illustrator, simply punt and give you self-intersecting output.

Even defining exactly what the offset polygon should look like is nontrivial if the original polygon is nonconvex. The "correct definition", in my opinion, is the result of growing the offset polygon outward from the original polygon. Whenever an offset vertex runs into an offset edge, split the offset polygon into two pieces at the point of collision and continue. Whenever an offset edges shrinks down to a point, delete it, create a new offset vertex, and continue.

The fastest practical algorithm for computing offset polygons runs in O(n^2) time where n is the number of edges in the original polygon. Perhaps counter to intuition, you can do slightly better if most of the vertices of the polygon are CONCAVE. The time bound becomes O(n log n + nr), where r is the number of CONVEX vertices. If the polygon is totally convex, you can compute any offset polygon in linear time using exactly the algorithm Dave described.

For details, see the following web pages:
        http://www.cs.duke.edu/~jeffe/open/skeleton.html
        http://www.cs.duke.edu/~jeffe/pubs/cycles.html
        http://www.iicm.edu/jucs_1_12/a_novel_type_of

> If you really need the set of points which are a perpendicular
> distance away from the original polygon, you need to replace the
> corners of the new polygon with circular arcs.

This is not the right way to think about it, since you have to know what the polygon is first. Rounded offset curves are MUCH easier to compute than mitered offset polygons. See Martin Held's research web page for a good description of offset curves and how to compute them efficiently:

http://www.cosy.sbg.ac.at/~held/projects/voronoi_2d/voronoi.html

back to contents


Correcting Normals on "Flipped" Polygons, by Kev (shkwav@globalnet.co.uk), Duncan Colvin (duncan@cads.ac.uk), Steve Baker (sbaker@link.com), John Nagle (nagle@netcom.com), Dennis Jiang (jiang@nortel.ca), Alejo Hausner (ah@cs.princeton.edu), and Eric Haines

[I've edited and merged some of the USENET replies, trying to leave intact a sense of the problems which emerged from various solutions. -EAH]

Kev writes on comp.graphics.algorithms:

I'm in the process of writing a 3D object viewer in OpenGL (which is the easiest/nicest 3D API I've every used I might add) - the problem I'm having is this:

The 3D program which uses the object format I'm displaying renders everything as double-sided polygons - however, OpenGL doesn't! When I attempt to render these polygons in OpenGL some of them will always appear facing the wrong way - i.e. the model looks like it has holes it in. I know this is happening as I can spin the model round and see the reversed polygons through holes in the other side!

So... does anyone know how I can fix this? I had an idea of "doubling up" each polygon, i.e. create two polygons for each polygon in the mesh and reverse the normal for the second copy - this would work but makes the model twice as large (and slower to draw!). Does anyone know of a fix in OpenGL for this or an algorithm to correct flipped normals in solid models (I know it can be done as programs like Lightwave/Rhino have a feature which can do exactly that!).

____

Duncan Colvin <duncan@cads.ac.uk> replies:

I think I know what you're on about. I have to import a mesh from a POV file into my program. The problem is that POV is a raytracer and doesn't care about triangle winding. This means I have to rewind the mesh once it has been loaded into my program. I have an algorithm that works (although I'm sure there is far better), which I've implemented in my CTriMesh class so that meshes can rewind themselves. Although I deal only with triangles which makes things a lot easier, I think the same algorithm could be used in your case also.

Anyway, I will now *attempt* to describe the algorithm (If y'all know of anything better, let me know)...

NOTE: works only for non-self-intersecting objects.

- Choosing the first polygon in the object and find out if it is facing the right way. This is done by:

        - Calculating the surface normal of the polygon and treating it
        as an infinite vector starting from the center point of the polygon.

        - Then check this vector against all the other polygons
        to see how many it intersects.

        - If there are an odd number of intersections, then the polygon is
        not facing the right way, so rewind it.

- Now you have one polygon that is correct it is simple to find the others. I base the next bit around the fact that if two polygons are both facing the same way (having the same winding, e.g. counterclockwise), their shared edges must have opposite direction vectors.

+----->-----+  +--->---+
|           |  |       |
/\         \/  /\      \/
|           |  |       |
+-----<-----+  +---<---+

I've separated the two polygons, but you can see the edge they would both share.

With this in mind it is a case of recursing through the polygons and rewinding them all, so as they satisfy the above rule.

____

Steve Baker <sbaker@link.com> comments on Duncan's method of finding the "seed" polygon that is supposed to face outwards:

This wouldn't work for an object that described (say) the inside of a room. This might be as simple as an inside-out cube (i.e. a cube with all the faces pointing inwards). Your code would see exactly one intersection (which is an odd number) and turn the room into a normal outward facing cube.

I don't think there is any way to distinguish between a cube and a 'room' and automatically do the right thing.

Also, your trick only works (as far as it does work) for objects without holes in their surfaces (i.e. solids).

____

John Nagle <nagle@netcom.com> comments:

Holes aren't a problem, but other mesh defects, like isolated faces and duplicate edges will cause some faces not to be corrected. And a Moebius strip or Klein bottle will hang the algorithm, so you have to detect examining the same face twice. My point is that you have to protect the algorithm against failure to terminate. This requires some extra bookkeeping.

This algorithm is O(N).

Counting surface crossings is a very expensive way to solve this problem; it's O(N^2). You also have all the usual problems with ambiguous cases where the normal crosses very near an edge or vertex.

There is the view from inside/view from outside problem, as you point out. For self-intersecting surfaces, it's even worse; you could be inside one region but not all of them.

This is a classic problem, and one often solved badly. For example, the "cleanup" function in Softimage doesn't do it very well.

____

Duncan Colvin <duncan@cads.ac.uk> replies:

O(N^2)? Only if you used that method to correct every polygon. You only need to correct the first polygon. Please correct me if I am wrong.

____

Steve Baker <sbaker@link.com> replies:

I think the problem of not knowing whether the object is intended to be viewed from the inside or from the outside is enough to show that the entire premise of trying to find an algorithm to do this is bogus. The data must be *created* with the correct face orientation or you are screwed.

____

Dennis Jiang <jiang@nortel.ca> comments:

Your algorithm only works for manifold geometry. For non-manifold solids with bad normals such as two cubes touching each other at a single vertex or a solid with holes, it will not work.

I think Duncan's first step, i.e., ray casting for finding or forcing a correct face normal is most general. The second half of his algorithm is not general, though. I used the ray casting to correct bad normals for arbitrarily complex solids, using a BSP tree to speed up the search for intersections.

If you know your solids to be manifold, Duncan's method should work reasonably quickly.

BTW, I am talking about correcting bad normals of a closed solid with or without holes, manifold or non-manifold. Not for open meshes.

____

Alejo Hausner <ah@cs.princeton.edu> comments:

This is a problem in mesh fixup. If you have connectivity information, then the method proposed by Duncan Colvin, which makes sure that one polygon is oriented outwards, then propagates that information to its neighbours, should work.

But if you don't know which polygons are adjacent to which others, the problem is harder. There is one approach which will work in such cases, assuming objects don't share faces:

It's an idea by T.M. Murali and Tom Funkhouser. The idea is to throw the polygons into a BSP tree, which subdivides space into convex cells, and then to figure out which of those cells are solid, and which ones are empty. Once you know which cells are solid, you can unambiguously orient the polygons on its boundary.

Each cell is assigned a "solidity" value (-1 if empty, +1 if solid, in between if we're not sure). Unbounded cells are known to be empty. Each cell votes on its neighbour. Suppose cell A and cell B are neighbours, and A has solidity "x". If the two cells are separated by a polygon, then A votes that B has solidity -x. If there is no separating polygon, A votes that B has solidity x (same as A). If there is a partial polygon separating the two cells, A's vote depends on how much of the boundary is occluded, the vote being somewhere between -x and +x, depending on the fraction of the boundary taken up by the polygon.

The sum of the votes is a linear equation, relating one cell's solidity to the solidities of its neighbours. All the votes together give a system of linear equations, with the solidities as the unknowns. The rest is (sparse) matrix numerical analysis.

This method also corrects for numerical errors and non-coincident vertices, all without user-adjustable error tolerances.

For all the details, check out Funkhouser's page:

   http://www.cs.princeton.edu/~funk/modeling.html

____

Kev reveals the boring answer:

William R. Bishop and several other people (cheers!) wrote:

Try turning off "backface culling"; this should make the polys re-appear, but may increase your draw-time.

____

Eric Haines comments (not on Usenet, just here):

A few years ago I spent a lot of time working on just this problem. Duncan gives the basic principle (edges of opposite directions) and two basic parts of the problem: establishing a "seed" polygon which all other polygons orient themselves to, and then traversing the connecting polygons and flipping face orientation as needed. As far as establishing a face which points outwards, I used Gavin Bell's method, discussed in RTNv7n5. I will go over this method here, and also discuss some of the problems encountered when using it. My own goal was to determine whether a mesh could be properly oriented. If it could not, for whatever reason, then I would note that the mesh could not use culling when displaying it (the user could override this setting).

Using something like a BSP tree to sort the polygons and so establish connectivity is one approach. Personally, I went for coding simplicity and used the qsort sorter to find matching edges. Each edge for each polygon had an edge record made for it, pointing back to what polygon it was from. The edge record also included pointers to the two vertices it was made from and a flag as to whether it was flipped or not.

Here's the technique for using qsort: first, within the edge record the two vertices saved are always ordered such that the first vertex is "before" the second. Basically, the X's of the two endpoints are compared and the point with the lower value is saved first. In case of a tie, the Y's, then the Z's are used.

Then, all the vertices can be sorted by giving qsort a simple routine to compare each edge for a "before" condition. This test involves doing the "before" test for the first vertices; if identical, then the second two vertices are compared. At the end of the sort, the edges are in order, and identical edges are next to each other in the list.

This algorithm was probably overkill - I didn't want a sorted list so much as just wanting the clusters of identical edges. To me this meant I wanted to use a hashing scheme, where the six coordinate values of the edge's two vertices would be used in the hashing function. For some reason my attempt at hashing code never really bought me much more speed in practice, though. My feeling is that a BSP scheme would also be costly - involved to code, and the BSP gives much more information than is needed for the problem (all we need are edge matches, we don't care about edge proximity).

Anyway, once you have the matching edges, you can build up links from each polygon to its neighbors. This process will give you one or more continuous meshes (where all the polygons are connected). You then properly orient the polygons in each continuous mesh so that they all face the same direction, using the edge rule Duncan gave (it doesn't matter which direction, just as long as they are all consistent - we'll correct the direction in a minute). John Nagle is correct in that you do need a little bookkeeping to keep track of what faces you've checked. Gory details follow, skip to the next paragraph if you don't care. I personally just used a stack and a flag for each polygon: grab any polygon as a seed, flag it as done, flip its neighboring polygons (those sharing an edge) as needed, flag each as done, and then put each on a stack. Pop the stack, and if a neighbor is unflagged as tested then flip the neighbor and flag it and push it in turn. When the stack is empty then all connecting polygons have been visited and oriented.

This orientation process is sometimes easier said than done: some cruddy models out there have edges which are shared by, say, three polygons, making it impossible to determine locally (i.e. without looking at the mesh as a whole) which orientation all three faces should have. This is not a theoretical problem: there's an old DXF head file out there which has ears that attach in just this way to the head, giving edges shared by three faces. Nonetheless, almost all models have all edges shared by at most two polygons. Note that if you detect any edge in a continuous mesh that belongs to only one polygon, you then do not have a solid (manifold, essentially) surface. If a surface is not solid, you're now definitely playing the odds when it comes to trying to guess the surface's proper orientation; more on that after the final step.

The final step is finding which way to orient each continuous mesh. If the object is solid, Gavin's method works great: you take the centroid of the bounding box around the mesh (note that the point does not have to be inside the solid for the following to work) and compute the volume defined this point and each individual polygon in the mesh, preserving the sign of the volume of each. Summed together, these volumes will give a total volume which is positive or negative. If it's negative, reverse the sense of all of the faces in the mesh. You're done.

Well, there are a few things to worry about. As Steve Baker points out, your model could actually be a room, in which case you're in trouble, getting exactly the wrong answer. In theory this is true, there's no perfect algorithm, but in practice what it means is that you should provide the user with the ability to override the algorithm determined face culling settings (e.g. turn off culling - probably a good idea for a room, so you can see it from the outside - or reverse the face orientations as a whole). Alternately, for this special case, you could use the viewpoint and test it against the solid - if a test ray hits a backface as the closest hit, then the solid is a room and so should be reversed.

Pathological self-intersecting objects (which are a pain to detect and extremely rare in the real world of CG [I've never seen one]) don't have a right answer as far as being single sided goes, but Gavin's test will ensure that the surface with the most volume enclosed faces outwards.

Another problem occurs if you apply your algorithm to meshes which are not solid (and which are the majority of models you'll find out there, as most are not made on a solids modeling system). If, for instance, you have two separate continuous meshes representing a box, with one mesh being the lid, you will run into problems if the lid turns out to be concave, for example. In this case the centroid of the lid will truly be outside it and, because the lid is not solid, a "solid" will be formed between the centroid and the lid's polygons which will cause the lid to face inwards. There are many other surfaces which will fool the algorithm; for example, a flat lid with thin raised letters will also raise the centroid above the lid and create more volume to be computed outside the lid.

One solution to this problem is to take the volume of both meshes with respect to the centroid of the box enclosing both, and ensure both have a positive volume. However, this won't work in many cases: you have to know beforehand that the two meshes make up the same solid object. Another possibility is that you may not have to do the volume test at all if the polygon vertices have their own vertex normals - these can be used to give a sense of which part is the outside (if they can be trusted).

Alejo Hausner's answer is interesting; has anyone had experience with using Funkhouser's solution?

back to contents


What's Mesa? by Brian Paul (brianp@ra.avid.com)

[Mesa's not a ray tracer, and I've covered it before in the RTN, but it bears mentioning again. It's grown considerably since the last time I saw it, and the fact that it has 3Dfx support and multi-threading is pretty great. -EAH]

Mesa is a free implementation of the OpenGL API which runs on Unix, Windows 95/NT, Macintosh, and most other computers.

Version 2.6 was released in February. The most exciting new development has been 3-D hardware support- specifically, support for the 3Dfx Voodoo hardware on Linux and Windows. Performance depends the CPU and other factors but up to several hundred thousand 3-D textured triangles can be drawn per second. Not bad for a free graphics library and a sub-$200 graphics card!

Version 3.0 of Mesa is in development. It will feature an implementation of the pending OpenGL 1.2 specification (perhaps the first "to market"). Also, version 3.0 will feature the multi-texture extension which supports simultaneous application of multiple texture maps. The new 3Dfx Voodoo2 chipset supports this feature.

Perhaps those most enthusiastic about Mesa's 3Dfx support have been gamers. ID Software has released versions of Quake (I and II) for Linux with 3Dfx support. Several other 3Dfx/Linux games are now available and more are in development.

Other Mesa developments in progress include further hardware support, multi-threading, and X server integration.

For more information about Mesa see http://www.ssec.wisc.edu/~brianp/Mesa.html

back to contents


Multithreading Mesa, by John Stone (johns@ultra2.cs.umr.edu)

Christoph Poliwoda and I have been working on adding multithreading features to Mesa, which allow an OpenGL programmer to safely use multiple threads, each thread potentially performing OpenGL operations in its own active rendering context. The work we've completed so far has added thread-safety features for Unix platforms using POSIX threads and Unix International (aka Sun) threads.

With threads, a programmer may render to multiple OpenGL contexts simultaneously, potentially offering a gain in performance, when run on multiprocessor machines.

Through the use of "sort last" style depth compositing operations, rendering of exceedingly complex depth buffered scenes can easily be accelerated. Other potential uses involve rendering to multiple windows concurrently, with potential performance improvements on multiprocessor systems.

Since the multithreading work is still in the early stages, the full range of potential applications hasn't been explored yet. As we make progress adding thread safety to more of the Mesa drivers, we should be able to further explore the potential uses of multithreaded OpenGL rendering, providing demos of multithreading tricks that work well, in future releases of Mesa.

back to contents


Recent Ray Tracing European Conference Papers

Here are some ray tracing references from recent conferences in Europe:

Proceedings of WSCG'98, the 6th International Conference in Central Europe on Computer Graphics and Visualization'98, February 1998

[Thanks to Dr. Andrea Sanna <sanna@polito.it> for passing these on.]

%A M. Krajecki
%A Z. Habbas
%A F. Herrmann
%A Y. Gardan
%T A Performance Tool Prediction for Parallel Ray Tracing P 200-207 K
parallel algorithm, MIMD application.

%A A. Lukaszewski
%A A. Formella
%T Fast Penumbra Calculation in Ray Tracing
%P 238-245
%K shadow computation, stochastic ray tracing, bounding volumes.

[The Lukaszewski paper is interesting (the others are probably interesting, too, but I have not seen them). Say you are using stochastic ray tracing for shadows, shooting a large number of shadow rays at a light disk. This is obviously expensive, as many rays are shot for each shadow test. The author's idea is to "explode" the original objects in a scene with respect to the area light. If the exploded object is hit by a ray traveling to the center of the light, then that object must be tested against the bundle of rays; but, if missed then that object can be ignored entirely for the entire bundle. This results in great savings, as there are many samples which are fully illuminated by the area light and these can be quickly categorized as such. Only samples which are in the penumbra or umbra have to have the whole bundle shot. The authors also consider imploding the objects - if a test ray hits such an object it means that the sample is fully in the umbra. -EAH]

%A A. Sanna
%A P. Montuschi
%T An Efficient Algorithm for Ray Casting of CSG Animation Frames P 323-330
%K animation rendering, bounding box computation, CSG.

%A P. Wonka
%A M. Gervautz
%T Ray Tracing of Non-linear Fractals
%P 424-430
%K nonlinear fractals, CSG-pL-systems, natural phenomena.

%A J. Zaninetti
%A B. Peroche
%T A Vector Model for Global Illumination in Ray Tracing P 448-455 K global
illumination, shading.

You can find other information at: http://wscg.zcu.cz/wscg98/wscg98.htm

________

At http://www.cg.tuwien.ac.at/conferences/EGRWS98/ is the site for the 9th Eurographics Workshop on Rendering. The workshop schedule shows what papers were presented. These papers eventually get published in a Springer Verlag book; if you want a copy of a paper before that, find the author.

The two ray tracing related papers:

%A Leif P. Kobbelt
%A Katja Daubert
%A Hans-Peter Seidel
%T Ray Tracing of Subdivision Surfaces

%A Laszlo Szirmay-Kalos
%A Werner Purgathofer
%T Global Ray-bundle Tracing with Hardware Acceleration J Ninth Eurographics
Workshop on Rendering

[Thanks to Phil Dutre <phil@graphics.cornell.edu> for the URL. -EAH]

________

The Second Eurographics Workshop on Parallel Graphics and Visualisation will be held in September. The web site is http://www.irisa.fr/caps/workshop/. Some papers from it:

%A Greg Ward Larson
%T The Holodeck: A Parallel Ray-caching Rendering System

%A E. Reinhard
%A A.J.F. Kok
%A A. Chalmers
%T Cost Distribution Prediction for Parallel Ray Tracing

%A J-C. Nebel
%T A New Parallel Algorithm rovided by a Numerical Model

%A T.A. Davis
%A E.W. Davis
%T A Parallel Frame Coherence Algorithm For Ray Traced Animations

back to contents


Attenuation in Water, by Bretton Wade (bwade@sgi.com) and Ian Ashdown (iashdown@ledalite.com)

Bretton Wade writes:

I'm seeking information about attenuation of light in seawater. Does anybody have any pointers? I'm not really interested in scattering due to particles in suspension, only clean, clear water.

Ian Ashdown replies:

There is some basic information in Chapter 28, "Underwater Lighting" of the IES Lighting Handbook, Eighth Edition. It includes a discussion of the absorption coefficient (which is wavelength-dependent), plus scattering information.

The chapter includes 17 references, although these should be sufficient:

Lankes, L. R. 1970. "Optics and the Physical Parameters of the Sea," Opt. Spectra 4(5):42-49.

Smith, R. C., and K. S. Baker. 1981. "Optical Properties of the Clearest Natural Waters (200-800 nm)," Applied Optics 20(2):177-184.

Duntley, S. Q. 1963. "Light in the Sea," J. Optical Society of America 53(2):214-233.

Austin, R. W. 1970. "Assessing Underwater Visibility," Opt. Spectra 4(5):34-39.

Kinney, J. A., S. M. Luria and D. O. Weitzman. 1967. "Visibility of Colors Underwater," J. Optical Society of America 57(6):802-809.


Eric Haines / erich@acm.org